☝File: UMT (Ultimate Multi Tool) QcFire V0.8
☝Setup Version: V0.8
☝Category: Without Password
Ultimate Multi Tool - QcFire v0.8
The Ultimate Qualcomm Module
Repair almost all Qualcomm Devices supporting Firehose Protocol
Supported Brands
- Alcatel
- Cherry Mobile
- Coolpad
- HTC
- Huawei
- Lenovo
- Lyf
- Micromax
- OnePlus
- Oppo
- Swipe
- Vivo
- Xiami
- YU
Supported CPUs for Auto Detection
- 8610
- 8909
- 8916
- 8917
- 8929
- 8936
- 8937
- 8940
- 8952
- 8953
- 8974
- 8976
- 8992
- 8994
- 8996
- 8996
- 8x10
- 8x26
Supported CPUs with Internal Loaders:
- 8610
- 8909
- 8916
- 8917
- 8929
- 8936
- 8937
- 8940
- 8952
- 8953
- 8974
- 8976
- 8992
- 8994
- 8996
- 8996
- 8x10
- 8x26
Updated Support For MSM8996
- Read Firmware.
- Write Firmware.
- Reset EFS.
- Format FS.
- Read Pattern ( older than 6.x).
- Reset FRP.
- Not like others who support 99% CPU but can not even BOOT this CPU.
Improved Reset EFS Function for LYF Phones
- You can Reset EFS of LYF phones to repair IMEI.
- No need to worry about SPC error on Read QCN.
- After Reset EFS, just Repair Original IMEI using our GSM Module > Qualcomm Universal > UMT Method [2].
Updated Flashing Function
- Now you can flash almost any phone with 512B or 4KB Sector.
- Auto patch file selection updated to use related patchx.xml like patch2.xml for rawprogram2.xml.
- Improved log display to show partition name with file name.
Updated Support For Alcatel Devices
- Now it should support devices with different firehose protocol, eg. OT-6045B.
Updated FRP Reset Method
- Now it will support more brands, like Alcatel etc.
- We recommend to make Security Backup first inscase you feel any issue later.
- Incase of any issue, you can flash back security backup you made.
Updated Program XML Handling
- Now it will simply skip flashing of missing files, instead of showing any error.
- Previously it was showing "file missing" message and flashing was not started.
- Please note, that some missing files from firmware may cause boot-loop.
Added more data to backup on Security Reading
Optimized Booting Speed
Optimized Disk Size Detection
Possibly Fixed BackupGPT Read Error on some devices
Other Improvements which we forgot to mention
COMMON ERRORS AND FIXES
- Write Err while sending loader.
- It means that selected loader (either manual or auto) is not compatible with hardware. You should try with other loader for same CPU (as mostly all CPU will be detected perfect with QcFire), or use Factory Loader which often comes with Firmware.
- Init Handshake Sequence Failed.
- Common communication problem with phone. Try to connect phone again in download mode and try operation again.
- Reading Pattern Data... Data Missing! Failed
- Read Pattern is supported only on Android older than 6.x. It should work fine with 5.x and lower Android Versions.
- Mi Account Not Active
- It means that Mi Account data was not found. Check if phone asks for Mi Account on startup. Otherwise, Format FS, turn phone ON, then turn OFF and try again.
- Warning! High Speed Driver not installed.
- This will seriously downgrade Reading performance. Please update driver from QcFire\Drivers folder. However, it should not affect flashing procedure.
☝If Need Any Help
Contact Us
☝SMART TECHNOLOGY
☝Altafur Rahaman Masum
WhatsApp & Phone No: +8801713819166
Skype: altafurrahaman
☝Monir Hossain
WhatsApp & Phone No: +8801718007683
Skype: monir.hossain172
☝✌Download Here (Google Drive)
☝✌RAR Password: Without Password
☝Setup Version: V0.8
☝Category: Without Password
Ultimate Multi Tool - QcFire v0.8
The Ultimate Qualcomm Module
Repair almost all Qualcomm Devices supporting Firehose Protocol
Supported Brands
- Alcatel
- Cherry Mobile
- Coolpad
- HTC
- Huawei
- Lenovo
- Lyf
- Micromax
- OnePlus
- Oppo
- Swipe
- Vivo
- Xiami
- YU
Supported CPUs for Auto Detection
- 8610
- 8909
- 8916
- 8917
- 8929
- 8936
- 8937
- 8940
- 8952
- 8953
- 8974
- 8976
- 8992
- 8994
- 8996
- 8996
- 8x10
- 8x26
Supported CPUs with Internal Loaders:
- 8610
- 8909
- 8916
- 8917
- 8929
- 8936
- 8937
- 8940
- 8952
- 8953
- 8974
- 8976
- 8992
- 8994
- 8996
- 8996
- 8x10
- 8x26
Updated Support For MSM8996
- Read Firmware.
- Write Firmware.
- Reset EFS.
- Format FS.
- Read Pattern ( older than 6.x).
- Reset FRP.
- Not like others who support 99% CPU but can not even BOOT this CPU.
Improved Reset EFS Function for LYF Phones
- You can Reset EFS of LYF phones to repair IMEI.
- No need to worry about SPC error on Read QCN.
- After Reset EFS, just Repair Original IMEI using our GSM Module > Qualcomm Universal > UMT Method [2].
Updated Flashing Function
- Now you can flash almost any phone with 512B or 4KB Sector.
- Auto patch file selection updated to use related patchx.xml like patch2.xml for rawprogram2.xml.
- Improved log display to show partition name with file name.
Updated Support For Alcatel Devices
- Now it should support devices with different firehose protocol, eg. OT-6045B.
Updated FRP Reset Method
- Now it will support more brands, like Alcatel etc.
- We recommend to make Security Backup first inscase you feel any issue later.
- Incase of any issue, you can flash back security backup you made.
Updated Program XML Handling
- Now it will simply skip flashing of missing files, instead of showing any error.
- Previously it was showing "file missing" message and flashing was not started.
- Please note, that some missing files from firmware may cause boot-loop.
Added more data to backup on Security Reading
Optimized Booting Speed
Optimized Disk Size Detection
Possibly Fixed BackupGPT Read Error on some devices
Other Improvements which we forgot to mention
COMMON ERRORS AND FIXES
- Write Err while sending loader.
- It means that selected loader (either manual or auto) is not compatible with hardware. You should try with other loader for same CPU (as mostly all CPU will be detected perfect with QcFire), or use Factory Loader which often comes with Firmware.
- Init Handshake Sequence Failed.
- Common communication problem with phone. Try to connect phone again in download mode and try operation again.
- Reading Pattern Data... Data Missing! Failed
- Read Pattern is supported only on Android older than 6.x. It should work fine with 5.x and lower Android Versions.
- Mi Account Not Active
- It means that Mi Account data was not found. Check if phone asks for Mi Account on startup. Otherwise, Format FS, turn phone ON, then turn OFF and try again.
- Warning! High Speed Driver not installed.
- This will seriously downgrade Reading performance. Please update driver from QcFire\Drivers folder. However, it should not affect flashing procedure.
☝If Need Any Help
Contact Us
☝SMART TECHNOLOGY
☝Altafur Rahaman Masum
WhatsApp & Phone No: +8801713819166
Skype: altafurrahaman
☝Monir Hossain
WhatsApp & Phone No: +8801718007683
Skype: monir.hossain172
☝✌Download Here (Google Drive)
☝✌RAR Password: Without Password
0 comments:
Post a Comment